ProSeal Covering Iron - The ProSeal covering iron from Hangar 9 features a Teflon™ coated shoe with tapered edges, a 12 foot power cord & a 2-year manufacturers warranty. The top-of-the line ProSeal features a patented temperature control unit, offering precision temp gauging for the use of different covering types.

Standard Covering Iron - This standard covering iron gives you thermostatic-control up to 450°, plus it features a contoured shoe and a safety stand.

Pro-Trim Covering Iron - The ProTrim Sealing Tool makes trim covering a snap. Get around corners and edges with ease! Sealing hinge gaps has never been easier.

Standard Heat Gun - A standard heat gun for shrinking down covering. It has settings for hot and cool air.

Covering Iron Sock - This premium covering iron sock is ideal for protecting both your irons shoe from scratches and your models finish.

Covering Glove - This covering glove keeps covering jobs cool to the touch. Every builder needs one! Pull corners tight without keeping an icepack on hand.

Hot Melt Glue Gun - This basic hot glue gun is just what the doctor ordered for sick foamies. We use these at the flying field for quick repairs and even use it to build some foamies.

Ergo Building Pins - These ergonomic building pins are easy on your fingers and are easy to put where you want them!

Small T Pins - 100 Pack of Small sized "T" pins for building.

Medium T Pins - 100 Pack of Medium sized "T" pins for building.

Large T Pins - 100 Pack of Large sized "T" pins for building.

Builders Clamps - This 10 pack of modelers clamps includes various sizes and work very well.

ADC 12" Mini Sander - This 12" Mini Sander is great for sanding small parts and general construction use. Additional grit sanding belts are available seperately.

Hobbico Hobby Knife - This Hobbico Hobby Knife comes with a safety cap and #11 blade.

Builders Knife Set - 17 piece knife set with wooden box. Includes 13 different blade types for cutting, chiselling, deburring, trimming and carving. Also includes a multi-purpose, heavy duty and #1 standard blade handles with knurled grips.

Dubro Hinge Slotter - The DuBro Kwik Hinge Slotter is an economical way to get square hinge points and a proper centerline everytime. Includes guides and various blade sizes to accomodate different brands and types of hinges.

Pro Edge Single Edge Razor Blades - These No.9 blades are an essential tool for covering tasks, among other hobby uses. They hold an edge much better than a No.11 blade. Comes in a package of 100 blades.

Pro Edge Razor Saw Set - From Pro-Edge, this Razor Saw kit includes one heavy duty handle and two different saw blades.

Opti-Visor - Don't strain your eyes. The DA4 OptiVisor makes it much easier to work on tiny parts and protect your eyes, all at the same time. Features 4x magnification.

4-in-1 Incidence/Throw Meter - Setup and measure your control throws, set and measure your thrust angles, set your models incidence for wings and tail section and is also a precision level. The bar is 18" long. The meter will reset to zero at any angle, which prevenets the need for leveling the model during setup. The best incidence meter available!

Lead Weight- 6 ounces of lead weight. Used for balancing model airplanes and balast for boats, subs and even cars.

Rosin Core Solder - 60/40 rosin core solder for electrical and mechanical connections.

Balsa Filler - This is super light building filler for woods, fiberglass & foam. Dries white and fast. Comes in a 8 ounce tub.

Balsa Colored Filler - This is super light building filler for woods, fiberglass & foam. Dries the color of Balsa Wood and fast. Comes in a 8 ounce tub.

Foam Rubber Padding - Protect your investment from vibration. This foam rubber is great for padding your receiver, receiver battery, fuel tank and other parts and isolating them from vibrations. Vibration in a receiver will eventually lead to a crash, whether the crystal pops out, fails or a filter fails. Vibration can also cause the fuel in a tank to foam. Don't let vibration be the end of your model.

Builders Triangles - Set includes two triangles. A 45 degree and 30/60 degree. A very cool interlocking feature allows the triangles to stand alone, creating an angle guide for squaring in two different dimensions. The 45 degree triangle features an inch scale, protractor and balsa thickness gauge. The 30/60 degree triangle has inch/metric scales, centering gauge and a corner cut-out for perfect 90 degree alignment

Builders Protractor - The prefect tool for measuring precise angles. Can be used for finding right and down thrust, among other measurements and can even be used on model cars to set camber, caster and toe-in.

Builders Metal Templates - "L" template for checking for square corners and edges, small 30°-60°-90° triangle, large 30°-60°-90° triangle and 45° triangle are cut away at the 90° corner to allow angle checks around fuselage sides.

Pen Vise Drill - 4" long Pen Vise Drill. Includes 12 bits with sizes from 52-74. The largest size bit is 1/16" in diameter.

6" Needle Nose Pliers - 6" long Needle Nose Pliers from SFM. Very comfortable, ergonomic rubber grips.

5" HD Wire Cutters - 5" long Heavy Duty Wire Cutters from SFM. Will easily cut music wire up to 5/64" with no strain.

Z-Bend Pliers - These Z Bend Pliers are made out of heat treated steel and carry a 2 year manufacturers warranty!

Ball Link Pliers - Our Curved Ball Link Pliers are perfect for adjusting, removing and installing ball links.

Curved Canopy Scissors - The perfect tool for cutting out canopies, rc car bodies, cowls and much more. These turn corners like no other scissor can!

Heavy Duty Scissors - These HD Super Scissors are great for covering work and other tough cutting needs.

SAE Ball End Hex Drivers - This 6 pack of ball end hex drivers includes .050", 1/16", 5/64" , 3/32", 7/64" & 9/64" sizes.

Metric Ball End Hex Drivers - This 5 pack of ball end hex drivers includes 1.27mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm sizes.

HD Metric Hex Drivers - This 4 pack of heavy duty, aluminum handled hex drivers includes 1.5mm, 2.5mm, 3mm, 3.5mm sizes. The handles are anodized, knurled and 5-3/8" long.

1.5mm Hex Key - This Allen Key size is the most common size used for wheel collars, and some micro helicopters like the CoCo Lama and others.

4 pc. Metric Nut Driver - 4mm, 5.5mm, 7mm & 8mm drivers. These are the most commonly used metric nut sizes in the hobby, particularly with helicopters and cars.

Super Reamer - A great reamer for cleaning out holes in woods, plastic & even light aluminum. Features a heavy duty, carbon fiber reinforced handle and a hard protective cap.

Self Healing Cutting Mats - A great bench top addition to any workspace. Keeps you from slicing up your work table and the wound closes after it's cut. Extremely heavy rubber has several useful gauges and measuring markers printed on the surface.

Hobbico 18" Straight Edge Ruler- STAINLESS STEEL! Flexible straight edge ruler is 18" long.

Hobbico 36" Straight Edge Ruler- STAINLESS STEEL & NON-SLIP! Flexible straight edge ruler is 36" long. Features Metric and Standard measurements.

Fingertip Prop Balancer - This prop balancer is easy to use and is small enough to fit in your pocket.

Kavan Deluxe Prop Balancer - This is one of the best prop balancers we have seen and it is extremely accurate.

Fox SAE Prop Reamer - This tool from Fox makes prop reaming a quick and accurate job. The reamer has 4 steps at 3/16", 1/4", 5/16" and 3/8".

Fox Metric Prop Reamer - This tool from Fox makes reaming props for larger, metric prop shafts a quick and accurate job. The reamer has 2 steps at 10mm & 12mm.

H9 Standard Power Panel - This power panel features power outlets for starters, glow plugs and fuel pumps.

Hobbico Standard Power Panel - This power panel features power outlets for starters, glow plugs and fuel pumps.

Hobbico Accu-Glo 2 Power Panel - This power panel features power outlets for starters, glow plugs and fuel pumps. The Accu-Glo can also charge your glow driver at rates of 300-400mah and can even tell you when your glow plug isn't heating up well, indicating a bad plug. Voltage indicator lets you know where your field battery charge level is.

Micro Panel Plus- This micro power panel features power outlets for starters, glow plugs and can charge your glow driver at the field. This space saving design is awesome!

12v 7ah Field Battery- For use in flight boxes and in conjunction with starters, fuel pumps, glow drivers and field chargers. Charger available seperately.

12v Hobbico Volt Watch- A great way to keep an eye on your field battery's power level. This Volt Watch is designed for monitoring a standard 12v field battery.

Radio South Pro Driver MKIII- Rechargeable, locking glow driver is one of the best drivers you can get today. Includes wall charger. The internal battery is 4 cell 1100mah NiMH and can be easily fast charged. Features a handy glow clip mount, voltage indicator, timed starting and is pocket sized. Carries a 2 year manufacturers warranty.

Mighty Midget Glow Driver- Rechargeable, locking glow driver is small enough to fit in your pocket. Includes wall charger. The internal battery is 1000mah and the driver measures 3" in length.

Metered Glow Driver- Standard length, rechargeable, locking glow driver includes wall charger and has a built in meter for monitoring the drivers voltage while attached to a glow plug.

Medium Glow Clip- Standard length, locking glow clip is pre-wired with banana plugs and ready for your power panel.

Long Glow Clip- Long, locking glow clip is pre-wired with banana plugs and ready for your power panel.

H9 Fuel Pump- For use with glow fuel only. Includes alligator clips, filtered clunk and hardware. Needs a 12v power source.

Hobbico Fuel Pump- The "Panel Ready" Hobbico 12v/6v fuel pump is designed for use with glow fuel only. Includes banana plugs. Needs a 12v or 6v power source.

Sonic Tronics Fuel Pump- The "MARK X" Hobbico 12v fuel pump is designed for use with glow fuel only. Needs a 12v or 6v power source.

Sonic Tronics Smoke Pump- A great smoke pump for your model.

H9 Manual Fuel Pump- This is a very economical pump for glow or gas.

Dubro Kwik-Fill Pump- A great manual fuel pump from Du-Bro and is designed for glow or gas. Includes pump, pickup filter, fuel cap fitting, filling probe, cap fitting nut O-ring, 48-3/4" (124cm) section of tubing for glow fuel only (use tygon for gas) and mounting chain.

12v High Torque Sullivan 601 Starter- The Sullivan 601 is the starter of which all other standard starters are modeled after! 210 in-oz of torque. 5500 no load RPM. For all engines to .60 cubic inches and most 1.20

DYNATRON 12v/24v Starter- The Sullivan 603 Dynatron is pure MUSCLE! Can operate on 12vdc or 24vdc. 340 in-oz of torque on 12 volts and 680 in-oz on 24 volts. Sullivan Dynatron Heavy Duty Starter for engines to 2.5 cubic inches

12v HD Electric Starter- Super tough electric starter from Hangar 9. This starter can start engine up to 1.8 ci.

ERC Starter Cone Insert- ERC's Starter Cone Insert is a durable silicone rubber replacement for most starters. It has a deep cone to better accept most prop spinners found in the market today.

Power Source for HD Starter- For our HD Starter, this upgrade gives you freedom from the power panel. Attached securely to the bottom of your starter. Includes case, hardware and 1.3ah 12v gel cell battery. Our "Flight Battery Charger" from above is recommended.

HD Chicken Stick- This strong Starter Stick is perfect for easy to start engines and an ideal backup for the dreaded dead flight box battery. It features a rubber molded endcap to prevent propeller damage, a non-slip contoured hard wood handle and is fuel proofed at the factory.

Long Reach Glow Plug Wrench- This is a great wrench for glow plug removal. Extra long for hard to reach plugs.

4 Way Glow Plug Wrench- This Du-Bro wrench for glow plug removal has 4 sizes of sockets for prop nots and other uses, along with 3 spaces fro storing glow plugs. Includes clip. You can also buy the clip seperately for mounting your existing wrench to your flight box.

Duratrax FlashPoint Temp Gauge- A great tool for monitoring temperature on engines, battery packs, esc's, electric motors, turbines & covering irons. Dial in a precise temperature on your covering iron, make sure you aren't exceeding your LiPo batteries heat specs or diagnose a problem engine early on. The FlashPoint will display temperature in Celsius or Fahrenheit and can read from –27 to +428°F (–33 to +220°C). It will store your minimum and maximum temperatures and has a battery level indicator.

H9 Tachometer- You can use this Digital Tach to measure RPM (revolutions per minute) with 2, 3 and 4 blade propellers. Includes a replaceable 220mah 3v Lithium battery and can measure up to 32,000 RPM.

Expanded Scale Voltmeter- Everyone needs one of these. This indespensable tool allos you to keep a check on your airplanes receiver battery, transmitter battery and can even test receiver battery under simulated servo loads. Never lose an airplane to a failed battery!

Digital Variable Load Voltmeter- With this tool you can check your batteries under .5a, 1a or 2a loads and is compatible with any 4-5 cell NiCd/NiMH packs or 2 cell LiPo/LiIo/LiMn (A123). Includes pre-wired universal connectors that can be used with all systems.