SG-50 5 Gram Micro Servo - These cool servos are very lightweight, and have a unisex connector & electronics that are compatable with JR, Futaba, Hitec, Spektrum, Parkzone, GWS, and most other receivers. They come supplied w
Compared to, but faster / stronger / lighter / less expensive than:

SG-90 9 Gram Mini-Servo - These cool servos are very lightweight, and have a unisex connector & electronics that are compatable with JR, Futaba, Hitec, Spektrum, Parkzone, GWS, and most other receivers. They come supplied with servo arms and screws, have a coreless motor, and a 6" long servo lead.

Compared to, but faster / stronger / lighter / less expensive than:

SG-5010 Standard Servo - These servos utilize the best in surface mount and direct attachment technology, with the motor and feedback pot being directly mounted to the pc board! Most of the cheaper competitive servos use wiring for these connections, and it is a primary point of failure for those cheap look-alikes. These servos also have a unisex connector & electronics that are compatable with JR, Futaba, Hitec, Spektrum, Parkzone, GWS, and most other receivers. They come supplied with servo arms, servo wheels, servo arm screws, rubber mounts, brass eyelets, and servo mounting screws! They have a FAST 3 pole motor, a Ball Bearing supported output shaft, and a 11-1/2" LONG servo lead.

Compared to, but faster / stronger / lighter / less expensive than:

ERC-995MG Hi-Torque, Metal Gear Servo - TONS OF TORQUE, METAL GEARS, FAST SPEED, IN A STANDARD SERVO CASE! Like our 945 below, these servos utilize surface mount and direct attachment technology, with the motor and feedback pot being directly mounted to the pc board! Uses a unisex connector that's compatable with JR, Futaba, Hitec, Spektrum, Parkzone, GWS, and most other receivers. Each ERC Hi-Torque servo comes supplied with a pair of heavy-duty servo arms, servo arm screws, rubber mounts, brass eyelets, and servo mounting screws. They have a FAST 3 pole motor, a Ball Bearing supported output shaft, and METAL GEARS. Compare with the HiTec HS-635 Hi-Torque... you get that kind of power for a lot less!

SPECS:

ERC-945MG Hi-Torque, Metal Gear Servo - MASSIVE POWER, METAL GEARS, FAST SPEED, IN A STANDARD SERVO CASE! Like our 5010 above, these servos utilize surface mount and direct attachment technology, with the motor and feedback pot being directly mounted to the pc board! Uses a unisex connector that's compatable with JR, Futaba, Hitec, Spektrum, Parkzone, GWS, and most other receivers. Each ERC Hi-Torque servo comes supplied with a pair of heavy-duty servo arms, servo arm screws, rubber mounts, brass eyelets, and servo mounting screws. They have a FAST 3 pole motor, a Ball Bearing supported output shaft, and METAL GEARS. Compare with the HiTec HS-645 Hi-Torque... this is a better & stronger servo for a LOT less!

Compared to, but faster / stronger / lighter / less expensive than:

Hitec HS-55 -

SPECS:

Hitec HS-65 -

SPECS:

Hitec HS-65 MG -

SPECS:

Hitec HS-5065 MG - Programmable Digital Version of HS-65, with Ball Bearing and Metal Gear.

SPECS:

Hitec HS-81 -

SPECS:

Hitec HS-81 MG -

SPECS:

Hitec HS-125 MG Thin Wing Servo -

SPECS:

Hitec HS-75 BB Retract Servo -

SPECS:

Hitec HS-311 -

SPECS:

Hitec HS-635 -

SPECS:

Hitec HS-645 MG-

SPECS:

Hitec HS-5625MG Digital -

SPECS:

Hitec HS-5645MG Digital -

SPECS:

Hitec HS-5955TG Digital -

SPECS:

Hitec HS-7955TG Digital - HS-5955TG Replacement, with same programmable features, but now has Resolution Mode Select, and Overload Protection Function!

SPECS:

Spektrum DSP60J Sub-Micro Digital Programmable-

Features JST connectors that are compatible for use with the AR6300 Nanolite receiver from Spektrum.

SPECS:

Spektrum DSP60 Sub-Micro Digital Programmable-

This servo is the same exact servo as the DSP60J above, except instead of the JST plug for the Nanolite receiver, it has a standard Spektrum servo plug on it.

SPECS:

JR DS285 Sub-Micro Digital -

SPECS:

JR DS821 Sport Digital -

SPECS:

JR NES-791 Low-Profile Retract Servo -

SPECS:

JR 2721 Ultra Torque Metal Gear -

SPECS:

JR NES 4721 High Torque Analog -

SPECS:

JR DS8711 MG Digital -

SPECS:

JR DS8411 MG Digital -

SPECS:

JR DS8611 MG Digital -

SPECS:

Scanner RC 9306 6g Micro BB -

SPECS:

Scanner RC 9311 11g Micro BB -

SPECS:

Scanner RC 9314 14g Micro MG -

SPECS:

Scanner RC 9317 17g Micro BB -

SPECS:

Scanner RC 9320 20g Micro MG -

SPECS:

Scanner RC 9766 High Speed BB MG -

SPECS:

Scanner RC 9776 Heli Cyclic BB MG - SUPER FAST! -

SPECS:

Scanner RC 9784 Race Torque MG BB w/ Heatsink -

SPECS:

Scanner RC 9844 Sport DIGITAL MG BB -

SPECS:

Scanner RC 9864 DIGITAL Ultra Torque MG BB -

SPECS:

Scanner RC 9866 DIGITAL Ultra Speed MG BB -

SPECS:

Futaba S3004 Standard -

SPECS:

Spektrum DSP (Digital Servo Programmer) -
This programmer is specifically for Spektrum digital micro servos. It is a great tool for people who are really into helis, indoor flying, and park flying who want to get optimal performance out of their digital micros. You can get the same performance and precision out of your micros as you would get out of larger digitals on your regular and giant scale planes! It enables servo reversing, dead band programming, and more!

JR MatchBox -
JR's new MatchBox is an ideal solution to the "matching dilemma," allowing modelers to match servos with precision and flexibility never before possible. Housed in a case about the size of an R610M micro receiver, the MatchBox plugs into any channel of a receiver that is driving more than one servo. Up to four servos can then be plugged into it and independently adjusted, using a simple selector dial and Increase/Decrease buttons on the MatchBox unit itself. Available adjustments include neutral point (sub-trim), end point, and reversing. It also offers the option of powering the servos connected to it via a separate battery pack. In the case of multiple servos on a single control surface, the MatchBox can be used to match each servo's output for better efficiency, as well as power them separately. This allows the modeler to retain a simple single receiver setup instead of having to resort to using two receivers to keep from running too much current through one.

The MatchBox is also ideal for multiple servos on a single channel that are tasked to different applications. A great example would be a scale airplane that has a steering servo and rudder servo that are both driven from the same channel. Not only could the modeler customize the endpoints for each, but the servo direction as well.

JR MatchMaker -
Setting up servos just got a whole lot easier, thanks to the new MatchMaker from JR®. The MatchMaker lets modelers accurately center servos, evaluate end points, and cycle servos at varying speeds, without ever having to switch on a transmitter. This is the perfect bench companion for any modeler looking to optimize servo performance and compatibility.

Specs:

Servo Tester -
You can use this simple tool to check servos for trouble, check direction and setup linkage without using the radio. Unit can power two servos at once and is powered by a 4.8-6v receiver battery. We have even used this tool to check electric flight motors using a motor, esc w/bec and flight battery. When used in this way you only need an ESC w/bec with flight battery connected to it for powering the unit, as no extra receiver battery would be neccesary.

Parsons Servo Security Clips -
These clips lock in your servo-to-extension conection without damaging your wires/plugs. Don't lose your model due to a lost servo connection. 3 clips per package.

Ernst Security Clips -
These Ernst clips are for Futaba "G" users and for universal use. These come with 2 clips per package.