Collet-type Prop Adapters - Beautifully crafted
prop adapters with collet-type attachment (slips onto motor shaft, and tightens). Machined
from 6061-T6 bar stock, complete with prop thrust washers and prop nut. Note* - The center
shaft of most outrunners can be loosened and pushed towards the front of the motor, to make
use of this type prop adapter as opposed to using a flange mount-type prop adapter that bolts
to the motor. These collet-type prop adapters usually result in a more 'true' prop mounting
with less vibration.
-> 2mm motor shaft/M5 Prop Shaft, 7/16" dia. prop washers - BUY THIS ITEM$4.99
-> 2.3mm motor shaft/M5 Prop Shaft, 7/16" dia. prop washers - BUY THIS ITEM$4.99
-> 3mm motor shaft/M5 Prop Shaft, 7/16" dia. prop washers - BUY THIS ITEM$4.99
-> 3.2mm motor shaft/M5 Prop Shaft, 7/16" dia. prop washers - BUY THIS ITEM$4.99
-> 2mm motor shaft/M5 Prop Shaft, 9/16" dia. prop washers - BUY THIS ITEM$5.49
-> 2.3mm motor shaft/M5 Prop Shaft, 9/16" dia. prop washers - BUY THIS ITEM$5.49
-> 3.2mm motor shaft/M5 Prop Shaft, 9/16" dia. prop washers - BUY THIS ITEM$5.49
-> 4mm motor shaft/M6 Prop Shaft - BUY THIS ITEM$5.49
-> 5mm motor shaft/M6 Prop Shaft - BUY THIS ITEM$6.99
-> 5mm motor shaft/M8 Prop Shaft + 'bullit-nose' prop nut - BUY THIS ITEM$6.99
-> 5mm motor shaft/M8 Prop Shaft - BUY THIS ITEM$7.99
-> 6mm motor shaft/M8 Prop Shaft - BUY THIS ITEM$7.99
Prop Saver Prop Adapters - Save your props! Our prop savers are great for foamies and other models without landing gear.
Outrunner Mounts - These mounts allow for installation
of outrunners on stick-type aircraft, while the larger mounts make for easy conversion from
glow to electric power!
-> Stick mount, for outrunners with 16/19mm screw spacing (speed 400 & 480 size) - BUY THIS ITEM$8.99
-> Adjustable Outrunner Mount, .40-.60 size outrunners. Adjusts in and out (fore and aft) about 3.75" to 5.25" for easy glow adaptation - BUY THIS ITEM$20.99
-> Adjustable Outrunner Mount, .60-1.20 size outrunners. Adjusts in and out (fore and aft) about 4.25" to 6" for easy glow adaptation - BUY THIS ITEM$24.99
Gold Plated Motor Connectors - Sold in packages of 3 pair.
3 pair = 3 male and 3 female connectors.
XTRM 2208/2212 Replacement Shaft - Replacement shafts for Hang-It R/C 2208 and 2212 series brushless motors. Note* Some of the early Hang-It R/C motors used a 3mm shaft and later upgraded to a 3.17mm shaft. Check your shaft to make sure you are ordering the correct size.
-> HIRC XTRM 3mm 2208/2212/2217 Shaft - BUY THIS ITEM$2.25
-> HIRC XTRM 3.17mm 2208/2212/2217 Shaft - BUY THIS ITEM$1.99
Deans & Deans Ultra Connectors - Deans connectors are
among the most popular battery connectors in use today.
-> Deans 2-pin connector, 1 pair - BUY THIS ITEM$2.99
Flexible Wire for battery/esc leads - Heavy duty, flexible red/black wire from Graupner. Comes in 78" lengths.
-> 1.5mm Wire, Red & Black pair, GR3391 - BUY THIS ITEM$7.99
-> 2.5mm Wire, Red & Black pair, GR3390 - BUY THIS ITEM$9.99
Countersunk Screws for Outrunner Mounting - These are the
hard-to-find tapered screws used in the radial mounts of most outrunners. We have them in stainless steel,
and in two different lengths. Click
HERE to see these
screws and our special 3" long outrunner panheads.
Heat Shrink Covering - Our durable ERC heatshrink
is thick-wall top quality material, perfect for managing the insulation jobs in your airplane,
helicopter, car, boat, etc. Sold in packages of 4 pieces, in 6" long lengths. Beats electrical tape
any day, and keeps your electrical connections secure. Makes a GREAT strain relief for servo
extension connections & ESC-to-motor terminations.
-> .12" I.D (just under 1/8" I.D.). 4 pieces, 6" long (1 pkg) - BUY THIS ITEM$2.50/pkg
-> .23" I.D (just under 1/4" I.D.). 4 pieces, 6" long (1 pkg) - BUY THIS ITEM$2.50/pkg
-> .35" I.D (just under 3/8" I.D.). 4 pieces, 6" long (1 pkg) - BUY THIS ITEM$2.50/pkg
-> .47" I.D (just under 1/2" I.D.). 4 pieces, 6" long (1 pkg) - BUY THIS ITEM$2.50/pkg
East R/C, Inc. - 106 E. Vance St. - Zebulon, N.C. 27597 Phone (919) 404-1522 - Fax (919) 269-0977 Retail Showroom
