Brushed and Brushless Electronic Speed Controllers
Electronic Speed Controllers (ESC) for Brushed Motors
DM20P 20A ESC for Brushed motor - Perfect for 370 &
380-series motors, with or without gearbox. SPECS:
Battery: Ni-CD/Ni-MH/8.4V-9.6V
BEC Output: 6V
Working Current: 6-10C, Max20A
External dimensions: L25mm × W19mm × H5mm
Weight: 12g
-> DM20P 20A ESC for Brushed motor - BUY THIS ITEM$16.99
DM30P 30A ESC for Brushed motor - Perfect for
heavily loaded 370/380-series motors, and 600-series motors with or without gearbox. SPECS:
Battery: Ni-CD/Ni-MH/8.4V-9.6V
BEC Output: 6V
Working Current: 6-10C, Max30A
External dimensions: L25mm × W19mm × H5mm
Weight: 12.5g
-> DM30P 30A ESC for Brushed motor - BUY THIS ITEM$22.99
Jeti 20A ESC for Brushed motors - Lithium Safe! The highest quality brushed controllers available! Auto cell count detect for low voltage cutoff. Brake on/off and battery type selectable. SPECS:
Battery: LiPo/NiCd/NiMH: 4V-14.4V
BEC Output: 5.1V
Working Current: 16-20C, Max22A
External dimensions: 1" × .75" × .3"
Weight: .53 oz.
-> JES020 20A ESC for Brushed motors - BUY THIS ITEM$42.99
Jeti 30A ESC for Brushed motors - Lithium Safe! The highest quality brushed controllers available! Auto cell count detect for low voltage cutoff. Brake on/off and battery type selectable. SPECS:
Battery: LiPo/NiCd/NiMH: 4V-14.4V
BEC Output: 5.1V
Working Current: 20-30C, Max32A
External dimensions: 1.3" × 1" × .3"
Weight: 1 oz.
-> JES030 30A ESC for Brushed motors - BUY THIS ITEM$47.99
Electronic Speed Controllers (ESC) for Brushless Motors
Hang-It R/C XTRM 10A ESC for Brushless motor - This speed controller is not programmable, but really easy
to use. It only weighs 8g and can actually handle bursts of 15A. It has a 1A BEC, a lipo auto detect, auto low-battery slow down, auto cut-off at 2.9V,
and auto shut down at loss of signal.
SPECS:
Input Voltage: Li-Po up to 11.1V (3S)
Output current: 10A continuously Max 15A
Dimensions: 23.5mm x 15.7mm x 6.1mm
Weight: 0.29 oz
-> Hang-It XTRM 10A ESC for Brushless motor - BUY THIS ITEM$21.99
HS18 18A ESC for Brushless motor - Programable
Electronic Speed Controller for Brushless motors. Easily programmed without external card or
requirement for PC connection. Friendly controller is easily programmed for type of battery and
number of cells, dynamic braking and amount, adjustable motor timing, and BEC voltage output!
SPECS:
Input Voltage: Ni-CD/Ni-MH/6~14.4V or Li-Po 7.4~11.1V
Output current: 18A continuously Max 20A
Dimensions: 45mm x 22mm x 8mm
Weight: 0.7 oz
-> HS18 18A ESC for Brushless motor - BUY THIS ITEM$25.99
HS20 20A ESC for Brushless motor - Programable
Electronic Speed Controller for Brushless motors. Easily programmed without external card or
requirement for PC connection. Friendly controller is easily programmed for type of battery and
number of cells, dynamic braking and amount, adjustable motor timing, and BEC voltage output!
SPECS:
Input Voltage: Ni-CD/Ni-MH/6~14.4V or Li-Po 7.4~11.1V
Output current: 20A continuously Max 25A
Dimensions: 50mm x 23mm x 8mm
Weight: 0.9 oz
-> HS20 20A ESC for Brushless motor - BUY THIS ITEM$29.99
HS25 25A ESC for Brushless motor - Programable
Electronic Speed Controller for Brushless motors. Easily programmed without external card or
requirement for PC connection. Friendly controller is easily programmed for type of battery and
number of cells, dynamic braking and amount, adjustable motor timing, and BEC voltage output!
SPECS:
Input Voltage: Ni-CD/Ni-MH/6~12V or Li-Po 7.4~11.1V
Output current: 25A. max current 30A, continuous current 25A for 10 minutes
-> HS25 25A ESC for Brushless motor - BUY THIS ITEM$35.99
SFM 30A ESC for Brushless motors - The SFM2421 brushless ESC is a programable
Electronic Speed Controller for Brushless motors. Brake Settings, Cutoff type are both programable from the transmitter. The ESC will automatically cutoff motor power if receiver signal is lost. Auto-Detect for low voltage and over-temperature protection.
SPECS:
-> SFM2421 30A ESC for Brushless motor - BUY THIS ITEM$41.99
HS30 30A ESC for Brushless motor - Programable
Electronic Speed Controller for Brushless motors. Easily programmed without external card or
requirement for PC connection. Friendly controller is easily programmed for type of battery and
number of cells, dynamic braking and amount, adjustable motor timing, and BEC voltage output!
SPECS:
Input Voltage: Ni-CD/Ni-MH/6~12V or Li-Po 7.4~11.1V
Output current: 30A. max current 35A, continuous current 30A for 10 minutes
-> HS30 30A ESC for Brushless motor - BUY THIS ITEM$39.99
HS50 50A ESC for Brushless motor - Programable
Electronic Speed Controller for Brushless motors. Easily programmed without external card or
requirement for PC connection. Friendly controller is easily programmed for type of battery and
number of cells, dynamic braking and amount, adjustable motor timing, and BEC voltage output!
SPECS:
Input Voltage: 13~25V
Output current: 50A: max current 55A, continuous current 50A for 10 minutes
BEC Output: 5V @ 3A
Dimensions: 50mm x 35mm x 8mm
Weight: 1.1 oz
-> HS50 50A ESC for Brushless motor - BUY THIS ITEM$48.99
East R/C, Inc.
- 106 E. Vance St. - Zebulon, N.C. 27597
Phone (919) 404-1522 - Fax (919) 269-0977
Retail Showroom
