R/C Hobbies and Supplies
 

Electric Motors

Brushed and Brushless outrunners & inrunners

Brushed Motors/Gear Drives

370-Speed Brushed Motor w/gearbox - Slick little 370-series Speed motor with 5:1 gearbox reduction. This motor/gearbox is used in our Butterfly-2G, and can be used in the ERC EZCub-EP and many other slow-flyers in the 20oz. range. SPECS:

  • Voltage: 7.2-10V
  • ESC Required: 20A Brush
  • Recommended Prop: SF 9x6
    -> 370-Speed Brushed Motor w/gearbox -  BUY THIS ITEM  $9.99

    • Long Can Speed 400/480 Brushed Motor - A bit hotter than your typical speed 400, this motor and can turn a 5.5x5.5 prop direct drive on 8 cell NiCd/NiMH or 2s LiPo. Will fit standard 400 size gearboxes. Case size: 27.5mm diameter x 50mm long. 3.6 ounces. 2.3mm shaft. SPECS:

  • Voltage: 5-12V
  • ESC Required: 20A Brush
  • Recommended Prop: 5x5-6x4 Direct Drive / 11x7 gear box @ 4:1
    -> Long Can 400 -  BUY THIS ITEM  $15.99

    • 600-Speed Brushed Motor - This is a powerful 600-series Speed motor used in many direct drive aplications. This motor is used in our ERC GS Thermal, and can be used as direct drive in many 2m Sailplanes. SPECS:

  • Voltage: 3 cell lipo or 8-10 cell 1700mAh battery
  • ESC Required: 30A Brush
  • Recommended Prop: Folding Prop 8"×4.5"
    -> 600-Speed Brushed Motor -  BUY THIS ITEM  $8.99


    • Brushless Motors

    X2204/14 Brushless Outrunner - Comes with radial mount and prop saver adapter built into motor housing. Similar to speed 300, but more power and super light weight. This motor is perfect for lightweight indoor models like shockeys and slow flyers and is great for lightweight micro outdoor models as well! SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 1,400
  • Current: 2-7A (9A @ 60 sec)
  • Power: 45W+
  • Shaft Diameter: 3mm hardened steel
  • Recommended Prop: 7x4 APC sf @ 3s = 15.85 oz. thrust
    8x4 APC sf @ 2s = 12 oz. thrust
  • Weight: 0.7 oz. (19 grams)
    -> X2204/14 Brushless Outrunner -  BUY THIS ITEM  Was $41.50, now -> $24.99!

    • X2208/08 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to speed 300, but MUCH more power. This high KV motor is perfect for lightweight Park Jets! SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 2,600
  • Current: 8-15A (20A @ 60 sec)
  • Power: 130W+
  • Shaft Diameter: 3.17mm
  • Recommended Prop: 5.1x4.5 APC e @ 3s = 19.3 oz. thrust/ 88 mph Pitch Speed!
  • Weight: 1.27 oz.
    -> X2208/08 Brushless Outrunner -  BUY THIS ITEM  Was $41.50, now -> $24.99!

    • X2208/17 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to speed 480, great for Park Flyers and 3-D Foamies weighing 7-22 oz. The optimum setup for this motor is with a 10x3.8 SF Prop, 3s 800mah LiPo and a lightweight Hang-It R/C 10amp ESC.
    SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 1,100
  • Current: 4-12A (14A @ 30 sec)
  • Power: 150W+
  • Shaft Diameter: 3.17mm
  • Recommended Prop: 11x4.7 APC sf @ 2s = 13.8 oz. thrust
    10x3.8 APC sf @ 3s = 18.7 oz. thrust
  • Weight: 1.2 oz.
    -> X2208/17 Brushless Outrunner -  BUY THIS ITEM  Was $41.50, now -> $24.99!     VIDEO

    • X2212/15 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to speed 400, great for Park Flyers & 3D Foamies weishing 10-28 oz. The optimum setup for this motor is with a 12x3.8 Prop, 1200mah 3s LiPo and an 18 amp MAG8 ESC.
    SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 930
  • Current: 4-16A (18A @ 60 sec)
  • Power: 150W+
  • Shaft Diameter: 3mm
  • Recommended Prop: 12x3.8 APC sf @ 3s = 34.8 oz. thrust
    13x4.7 @ 2s = 22 oz. thrust
  • Weight: 1.6 oz.
    -> X2212/15 Brushless Outrunner -  BUY THIS ITEM  Was $45.50, now -> $28.99!

    • 2408-21-H Brushless Outrunner for Post Mount - Comes with post mount and prop nut. Perfect for our CB-35 and others. SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 1,400
  • Current: 15-18A
  • Max RPM: 8,200
  • Max Power: 113W
  • Shaft Diameter: 3mm
  • Recommended Prop: 8x6 3s /9x6 2s
  • Weight: 1.6 oz.
    -> 2408-21-H Brushless Outrunner -  BUY THIS ITEM  $16.99

    • HM2812-1200 Brushless Outrunner - Comes with radial motor mount, all fasteners, gold connectors & receptacles, and prop adapter. Perfect for our Neiuport 28 and others. SPECS:

  • Voltage: 7.4-11.1V 2~3S Li-Po
  • Current: 6.8~15.8A
  • Watts: 65~166W
  • RPM/V: 1,200
  • Thrust: 27oz. (770g)
  • Prop: 8x3.8~10x4.7
  • Weight: 2.0 oz
    -> HM2812-1200 Brushless Outrunner -  BUY THIS ITEM  $54.99

    • A20-28M Brushless Outrunner - Comes with radial motor mount, all fasteners, gold connectors & receptacles, and prop adapter. Perfect for our Yak 54-280, Extra260 EP, EP Extra330L, and others. SPECS:

  • Voltage: 7.4-11.1V
  • Current: 15-20A
  • Power: 190 Watts +
  • RPM/V: 1,050
  • Prop: 9x4.7/9x6
  • Weight: 1.6 oz
    -> A20-28M Brushless Outrunner -  BUY THIS ITEM  $37.99

    • SK400XT Brushless Outrunner - Comes with radial mount. Similar to speed 400-450. A real winning combination for park flyers and foamies. Nothing beats a SK400XT, 10x3.8 sf prop, 3s LiPo and Hang-It R/C 10 amp esc!Draws only 3 amps hovering a foamy weighing 8.5 oz. SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 2,200
  • Current: 2-10A (12A @ 45 sec)
  • Power: 100+W
  • Shaft Diameter: 3mm
  • Recommended Prop: 11x4.7 on 2s / 10x3.8 on 3s
  • Weight: 1.5 oz.
    -> SK400xt Brushless Outrunner -  BUY THIS ITEM  $29.99

    • X2212/06 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to speed 400-450, hi-RPM motor great for heli, high-speed airplanes, jets weighing 10-35oz. SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 2,200
  • Current: 14-22A (28A @ 60 sec)
  • Power: 200W+
  • Shaft Diameter: 3mm
  • Recommended Prop: 6x5.5 APC e @ 3s = 27 oz. thrust / 93mph Pitch Speed!
  • Weight: 1.6 oz.
    -> X2212/06 Brushless Outrunner -  BUY THIS ITEM  Was $45.50, now -> $28.99!

    • X2217/04 Brushless Heli Outrunner - Includes bullet connectors, male and female. This motor is perfect for ballistic performance on 450 size Helis. SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 3,500
  • Current: 10-50A (55A @ 60 sec)
  • Power: 600W+
  • Shaft Diameter: 4mm
  • Dimensions: 27.5mm x 30mm
  • Weight: 2.5 oz. (70 grams)
    -> X2217/04 Brushless Heli Outrunner -  BUY THIS ITEM  Was $55.00, now -> $31.99!

    • X2217/08 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to speed 480, great for Park Flyers & 3D birds weighing 10-28 oz. SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 1,100
  • Current: 9-18A (18A @ 60 sec)
  • Power: 220W+
  • Shaft Diameter: 3.17mm
  • Recommended Prop: 10x5 APC e @ 3s = 40.7 oz. thrust
    11x5.5 APC e @ 2s = 27.85 oz thrust
  • Weight: 2.5 oz.
    -> X2217/08 Brushless Outrunner -  BUY THIS ITEM  Was $55.00, now -> $31.99!     VIDEO

    • Little Screamers "Park Jet" - The perfect choice for Park Jets! . SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 2,800
  • Current: 10-20A (23A @ 60 sec)
  • Shaft Diameter: 3mm
  • Recommended Prop: 4x4 - 6x5.5 on 3s / 6x5.5 will draw 18.5 amps. Do not static test longer than 30 seconds.
  • Weight: 25 grams
    -> MMC2800 2800Kv Park Jet -  BUY THIS ITEM  $49.99

    • Little Screamers "SUPER Park Jet" - Super charge your Park Jets! This motor will produce 24 ounces of thrust at 19 amps with a 7x5 prop on 3s LiPo and 36 ounces of thrust on 4s LiPo at 27 amps. For 4s setups, excellent cooling is required. SPECS:

  • Voltage: 7.4-14.8V
  • RPM/V: 2,350
  • Current: 10-30A (30A @ 30 sec)
  • Shaft Diameter: 3mm
  • Recommended Prop: 5x5 - 7x5 on 3s/4s Do not static test longer than 30 seconds.
  • Weight: 32 grams
    -> MMC2200 2350Kv Park Jet -  BUY THIS ITEM  $62.99

    • 3500Kv Brushless Outrunner - Perfect for ducted fans! This motor fits perfectly inside of our SF 66mm Fan Unit. SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 3,500
  • Current: 9-18A (25A @ 60 sec)
  • Shaft Diameter: 2.3mm
  • Recommended Prop: 7x4 on 3s / 8x8 on 2s or 66mm Fan on 3s
  • Weight: 1.8 oz.
    -> MT2235 3500Kv Brushless Outrunner -  BUY THIS ITEM  $44.99

    • A22-15M Brushless Outrunner - Comes with radial motor mount, all fasteners, gold connectors & receptacles, and prop adapter. Perfect for our Spirit 3-D, Tiger Moth, and others. Power similar to a sport .20-.25 glow/muffler, depending on prop & bettery selection. Our favorite setup for this motor is with a 10x6 APC e prop, 3s 1200mah LiPo and 30 amp Mag8 ESC!
    SPECS:

  • Voltage: 7.4-11.1V
  • Current: 20-25A
  • Power: 240 Watts +
  • RPM/V: 1,050
  • Prop: 10x5/10x8
  • Weight: 2.2 oz
    -> A22-15M Brushless Outrunner -  BUY THIS ITEM  $39.99

    • 28309 Brushless Outrunner - Comes with radial motor mount, all fasteners, gold connectors & receptacles, and prop adapter. Perfect for our GeeBee Model "Y" and others. Power similar to a hot .32 or sport .40 glow engine w/muffler, depending on prop & battery selection. SPECS:

  • Voltage: 7.4-14.8V
  • Current: 25-30A
  • Power: 277 Watts +
  • RPM/V: 1,280
  • Prop: 9x4.7-11x5.5
  • Thrust: 37 oz (1.05Kg)
  • Weight: 2.0 oz
  • Shaft Diameter: 3mm
    -> 28309 Brushless Outrunner -  BUY THIS ITEM  $59.99
    -> Prop Adapter ONLY for 28309 -  BUY THIS ITEM  $2.99

    • X2814/06 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to standard .25-.30 size glow engine, great for for sport flying aircraft weighing 2-4 lbs. SPECS:

  • Voltage: 7.4-11.1V
  • RPM/V: 1,400
  • Current: 18-30A (40A @ 60 sec)
  • Power: 350W+
  • Shaft Diameter: 4mm
  • Recommended Prop: 10x6 APC e @ 3s = 52 oz. thrust
  • Weight: 3.5 oz.
    -> X2814/06 Brushless Outrunner -  BUY THIS ITEM  Was $65.00, now -> $39.99!

    • 35425 Brushless Outrunner - Comes with radial motor mount, all fasteners, gold connectors & receptacles, and prop adapter. Perfect for our Super Diamona and others. Power similar to a strong .40 glow engine w/muffler, depending on prop & battery selection. SPECS:

  • Voltage: 7.4-14.8V
  • Current: 35-41A
  • Power: 506 Watts +
  • RPM/V: 1,100
  • Prop: 11x5.5-13x6.5
  • Thrust: 74 oz (2.1Kg)
  • Weight: 4.7 oz
  • Shaft Diameter: 5mm
    -> 35425 Brushless Outrunner -  BUY THIS ITEM  $84.99
    -> Prop Adapter ONLY for 35425 -  BUY THIS ITEM  $3.99

    • X2820/06 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to a .46 size glow engine, great for for sport & aerobatic aircraft weighing 2-6 lbs. SPECS:

  • Voltage: 11.1V - 18.5V
  • RPM/V: 1,000
  • Current: 15-25A (37A @ 60 sec)
  • Power: 560W+
  • Shaft Diameter: 5mm
  • Recommended Prop: 13x6 APC e @ 3s = 69 oz. thrust
  • Weight: 5.11 oz.
    -> X2820/06 Brushless Outrunner -  BUY THIS ITEM  Was $65.00, now -> $44.99!

    • X2826/04 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to a hot .46-.55 size glow engine, great for speed models weighing 2-6 lbs. SPECS:

  • Voltage: 11.1V - 18.5V
  • RPM/V: 1,100
  • Current: 30-50A (55A @ 60 sec)
  • Power: 600W+
  • Shaft Diameter: 5mm
  • Recommended Prop: 14x6 @ 3s, 13x6 @ 4s
  • Weight: 5.11 oz.
    -> X2826/04 Brushless Outrunner -  BUY THIS ITEM  Was $67.00, now -> $47.99!

    • X3520/06 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to good sport .50-.61 size glow engine, great for for 3D (to 4lbs), sport & aerobatic aircraft weighing 3-6 lbs. SPECS:

  • Voltage: 11.1V - 18.5V
  • RPM/V: 800
  • Current: 18-40A (50A @ 60 sec)
  • Power: 700W +
  • Shaft Diameter: 5mm
  • Recommended Prop: 12x6/13x4
  • Weight: 7.05 oz.
    -> X3520/06 Brushless Outrunner -  BUY THIS ITEM  Was $75.00, now -> $58.99!

    • X4120/06 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to hot .61 size glow engine, great for for 3D (to 6lbs), sport & aerobatic aircraft weighing 4-8 lbs. SPECS:

  • Voltage: 14.8V - 22.2V
  • RPM/V: 640
  • Current: 30-65A (70A @ 60 sec)
  • Power: 900W+
  • Shaft Diameter: 6mm
  • Recommended Prop: 14x10 5s / 13x10 6s
  • Weight: 9.9 oz.
    -> X4120/06 Brushless Outrunner -  BUY THIS ITEM  Was $100.00, now -> $69.99!

    • X4130/06 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to hot .91-1.00 size glow engine, great for for 3D (to 9lbs), sport & aerobatic aircraft weighing 4-14 lbs. SPECS:

  • Voltage: 14.8V - 25.9V
  • RPM/V: 510
  • Current: 30-60A (70A @ 60 sec)
  • Power: 1500W+
  • Shaft Diameter: 6mm
  • Recommended Prop: 16x10 6s / 14x10 5s
  • Weight: 14.10 oz. (400 grams)
    -> X4130/06 Brushless Outrunner -  BUY THIS ITEM  Was $110.00, now -> $79.99!

    • X5330/09 Brushless Outrunner - Comes with radial mount and prop adapter. Similar to a 1-20-1.60 size glow engine or 20-26cc gas (depending on prop), great for for 3D (to 10lbs), sport & aerobatic aircraft weighing 8-20 lbs. SPECS:

  • Voltage: 18.5V - 37V
  • RPM/V: 260
  • Current: 35-55A (80A @ 60 sec)
  • Power: 2300W+
  • Shaft Diameter: 8mm
  • Recommended Prop: 20x12 / 10 cells
  • Weight: 21 oz.
    -> X5330/09 Brushless Outrunner -  BUY THIS ITEM  Was $150.00, now -> $119.99!     VIDEO

    • ETH 5512 EDF Inrunner - 21mm diameter, 43.7mm long, 2.35 oz., 3mm shaft, Kv=5100. Use with 3 Lipo cells capable of supplying 25 amps. Produces over 20 oz. of thrust at 11.1V when used with ETH550 Fan. Works great in our LYNX Jet and Alfa A-4. SPECS:

  • Voltage: 7.4V - 11.1
  • RPM/V: 5100
  • Current: 5-24A (18A @ 30 sec)
  • Power: 300+W
  • Shaft Diameter: 3mm
  • Recommended Fan: 56mm - 66mm Fans
  • Weight: 1.75oz. (50 grams)
    -> ETH 5512 EDF Inrunner -  BUY THIS ITEM  $32.99

    • Little Screamers "JET SCREAMER" - The best motor for small electric ducted fan models! The motor comes with a 21mm adapter for easy mounting to fan units. With the motor in the exhaust air of the fan, cooling is very good. RPM on a 56mm fan with a 3s LiPo is over 40,000 and will draw about 14 amps at full throttle (static/loaded). RPM on the same fan with a 4s LiPo is over 50,000 with about an 18-20 amp current drain. We reccommend that you never static test this motor for longer than 30 seconds. SPECS:

  • Voltage: 7.4V - 14.8V
  • RPM/V: 4500
  • Current: 5-24A (18A @ 30 sec)
  • Power: 190-450W+
  • Shaft Diameter: 3mm
  • Recommended Fan: 56mm - 66mm Fans
  • Weight: 1.75oz. (50 grams)
    -> LS Jet Screamer EDF Motor -  BUY THIS ITEM  $85.99


    • East R/C, Inc. - 106 E. Vance St. - Zebulon, N.C. 27597
    Phone (919) 404-1522 - Fax (919) 269-0977
    Retail Showroom

    Product Catalog   Information Center  Warranty & Refund Policies   Privacy & Security Policies  
    Customer Service Contact Information  Mail/ Fax Order Form   Photo Gallery  In the News
      Shipping & Delivery Policies  Terms & Conditions
    Newsletter Archive

    © 2007 & beyond... East R/C, Inc.
     "East R/C", "Wake R/C", "R/C East", "Down East R/C ", & "NC R/C" are Trademarks of
    East R/C, Inc. All Rights Reserved.

       
    We accept these fine credit cards, money orders, checks, and CASH

    Check out the Top 50 RC Model Airplane sites!