R/C Hobbies and Supplies

EAST R/C QUICK LINKS TOOLBAR - CLICK A CATEGORY OR SELECT 'MAIN CATALOG' FOR ALL PRODUCTS

VIEW CART/CHECKOUT

MAIN CATALOG AIRCRAFT PROP ACC HARDWARE & MISC LUBRICANTS MOTOR ACC HOME
 

DRAGONUS II N-Plus 3d Heli KIT

Including a STRONG 500XH 300+ Watt Outrunner!

**NOTE** OUT OF STOCK - SELECT 'MAIN CATALOG' ABOVE FOR ALL NEW PRODUCTS












Dragonus 3D Heli KIT - Looking for something a bit different that can outperform most any 450 size 3D Heli? Look no further! The Dragonus Kit falls together and the included motor provides wicked power for over the top, bank and yank maneuvers. We have flown many small helis and this one takes the cake. The Dragonus is a "400 Class" 3D heli CCPM (collective cyclic pitch mixing). You can set the head of the Dragonus up for 3 sensitivities, from mild mannered (good for initial flights) to extreme 3D action.


  • Recommended ESC: 30A ESC
  • Servos Needed: Four 8g Minimum (Hitec HS-65'a are great)
  • Motor: 500XH 300+ Watts (included)
  • Main blade diameter: 28.5"/724mm
  • Tail blade diameter: 130mm
  • Length: 26"/660mm
  • Height: 8.25"/210mm
  • Flying Weight: 27oz./ 765g
  • Pinions Included: 13t, 14t, 15t
  • Recommended Gyro: Futaba GY240
  • Tail rotor drive Belt System

    Needed to complete this kit: 6 channel Radio System with 4 servos, Gyro, ESC, 11.1V 3Cell Li-Po battery (1800-2500mah) & Charger

    Check out the thread on RCGroups for some ideas on painting your canopy! CLICK HERE



    More Pictures ->  (pic 1)  (pic 2)  (pic 3)  (pic 4)

    -> Dragonus 3D Heli KIT -  OUT OF STOCK  $158.00!! (Normally $189.99)


    Replacement Parts
    -> Pinion 11/12T for 3mm Shaft -  OUT OF STOCK  $4.29
    -> Pinion 11/12T for 3.17mm Shaft -  OUT OF STOCK  $4.29
    -> Pinion 13/14/15T for 3mm Shaft -  OUT OF STOCK  $4.39
    -> Pinion 13/14/15T for 3.17mm Shaft -  OUT OF STOCK  $4.39
    -> Main Gear -  OUT OF STOCK  $10.89
    -> High Quality Belt -  OUT OF STOCK  $9.09
    -> Main Shaft & Lock Ring -  OUT OF STOCK  $9.59
    -> Feathering Shaft -  OUT OF STOCK  $6.59
    -> Main Gear Housing -  OUT OF STOCK  $9.99
    -> On-Way Bearing Shaft -  OUT OF STOCK  $4.79
    -> Tail Rotor Shaft -  OUT OF STOCK  $6.59
    -> Swashplate -  OUT OF STOCK  $13.99
    -> Main Rotor Housing -  OUT OF STOCK  $6.59
    -> Main Blade Grips -  OUT OF STOCK  $14.39
    -> Tail Blade Grips -  OUT OF STOCK  $12.59
    -> Aluminum Balls for Ball Links -  OUT OF STOCK  $10.89
    -> CCPM Rod Set -  OUT OF STOCK  $2.09
    -> Rod Set -  OUT OF STOCK  $2.09
    -> Tail Basemount Set -  OUT OF STOCK  $8.29
    -> Tail Control Set -  OUT OF STOCK  $7.59
    -> Pitch Control Arm Set -  OUT OF STOCK  $8.79
    -> Horizontal Stab/Fin -  OUT OF STOCK  $5.69
    -> Vertical Stab/Fin -  OUT OF STOCK  $4.79
    -> Nylon Paddles -  OUT OF STOCK  $4.29
    -> Tail Rotor Blades -  OUT OF STOCK  $3.89
    -> Stabilizer Bar/Flybar -  OUT OF STOCK  $4.29
    -> Tail Boom Support -  OUT OF STOCK  $4.29
    -> Tail Rod -  OUT OF STOCK  $2.09
    -> Main Rotor Blades, Wood w/ Carbon Plates -  OUT OF STOCK  $15.29
    -> Tail Boom -  OUT OF STOCK  $8.29
    -> Canopy -  OUT OF STOCK  $10.89
    -> Landing Skid -  OUT OF STOCK  $8.79
    -> Canopy Buttons/Grommets -  OUT OF STOCK  $4.50





  • East R/C, Inc. - 112-C n. Church St. - Zebulon, N.C. 27597
    - Fax (919) 269-0977
    Retail Showroom

    Product Catalog   Information Center  Warranty & Refund Policies   Privacy & Security Policies  
    Customer Service Contact Information  Mail/ Fax Order Form   Photo Gallery  In the News
      Shipping & Delivery Policies  Terms & Conditions
    Newsletter Archive

    2007 & beyond... East R/C, Inc.
    "East R/C", "Wake R/C", "R/C East", "Down East R/C ", & "NC R/C" are Trademarks of
    East R/C, Inc. All Rights Reserved.

       
    We accept these fine credit/debit cards, money orders, checks, and CASH